DOW FILMTEC SW30XLE-440i Seawater Membrane
Kami adalah importir distributor agen dan supplier terlengkap untuk menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan price harga terbaik
DOW FILMTEC™ SW30XLE-440i offers medium salinity and medium temperature feed waters an advanced combination of high productivity and high rejection through extra-low energy consumption and single-pass design. It is also an ideal choice for two-pass seawater designs or high salinity brackish water applications. The combination of high active area and thick feed spacer of the DOW FILMTEC membranes results in higher productivity and lower cleaning frequency which enable sustainable lower lifecycle cost.
|
Nominal Active Surface Area |
Permeate Flow Rate |
Typical Boron Rejection |
Stabilized Salt Rejection |
Minimum Salt Rejection |
|
440 (41) |
9,800 |
91.5 |
99.80 |
99.55 |
· The above values are normalized to the following conditions: 32,000 ppm NaCl, 5 ppm Boron, 800 psi (5.5 MPa), 77°F (25°C), pH 8 and 10% recovery.
· Permeate flows for individual elements may vary +20/-15%.
· Product specifications may vary slightly as improvements are implemented.
· Active area guaranteed +/-5%. Active area as stated by Dow is not comparable to nominal membrane area often stated by some manufacturers.
Untuk permintaan penawaran silahkan hubungi
PT PROFILTER INDONESIA
Ruko Blok G/54 – Gudang A/01
Jl.Canadian Broadway
Kawasan Pergudangan Commpark – Kotawisata – Cibubur
Mobile : 081385066789
Email : sales@profilterindonesia.com
