Birm Clack A8006 Filter Media PT PROFILTER INDONESIA

https://filtercartridgeindonesia.com/upload/A8006%20Clack%20Birm%20granular%20filter%20media%20Indonesia_20181022102228_20241029203804_large2.jpg

Description

Reviews

Contact

Birm Clack A8006 Filter Media

Birm

Media Filter

Birm Clack A8006 Filter Media, Birm A8006 Filter Media, Birm A8006, Birm Filter Media, Clack A8006 Filter Media, Birm, Clack, A8006, Filter Media, Media Filter Birm, Birm Filter

Birm Clack A8006 Filter Media

Kami adalah importir distributor agen dan supplier terlengkap untuk menyediakan berbagai kebutuhan spare part water treatment untuk keperluan industri dengan price harga terbaik

Birm is a black granular filter material used for removal of iron and/or manganese from water in pressure or gravity systems. It contains an active insoluble catalyst to precipitate iron and/or manganese. Because the presence of iron is most common, iron removal is the usual application for Birm. Under suitable conditions, the iron and dissolved oxygen in water react on contact with the Birm filter bed and, as a result, the iron is precipitated in the form of hydroxide. This is a flocculent material which is filtered out in the bed of Birm. Periodic backwashing flushes out the accumulated iron and the Birm is again ready to perform its function. Birm is not consumed in the iron removal operation.

Advantages

No chemicals to purchase for maintenance. Regeneration not d.
Iron removal efficiency is extremely high.
Negligible labour cost. Only periodic backwashing d.
Durable material with a long life.
Wide temperature range application.

Conditions necessary for the use of Birm

Iron Removal

No hydrogen sulphide present.
Organic matter not to exceed 4-5 ppm as indicated by the oxygen consumed value.
Oil must not be present.
A dissolved oxygen content of at least 15% of the iron. (Example Iron = 10ppm.
Dissolved Oxygen = 1.5 ppm or more).
A pH of 6.5 or higher.

Manganese Removal

· The removal of manganese from water by the catalytic action of Birm usually s a higher pH than is d for iron removal. Such water should have a pH in the range of 8.0-9.0.

· The dissolved oxygen content should be 15% or more of the total manganese and iron expressed in ppm.

· Other conditions are the same as for iron removal.
For manganese removal, consult our laboratory.

Untuk permintaan penawaran Birm Clack A8006 Filter Media silahkan hubungi

PT PROFILTER INDONESIA

Ruko Blok G/54 – Gudang A/01

Jl.Canadian Broadway

Kawasan Pergudangan Commpark – Kotawisata – Cibubur

Kantor : +6221 22962668

Gudang : +6221 84937805 , 84937329

Mobile : 081385066789

Email : sales@profilterindonesia.co.id