Hydranautics CPA5-LD-4040
PFI Watermaker adalah importir distributor agen dan supplier Hydranautics CPA5-LD-4040 terlengkap menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan price harga terbaik
Kami memiliki berbagai macam jenis filter mulai dari Hydranautics RO membrane , filter cartridge, housing bag filter cartridge hingga segala jenis spare part pendukung water treatment lainnya.
CPA (Composite Polyamide) Hydranautics
Ultrapure water is essential in several industrial applications. CPA RO membranes are regarded as the industry standard for all critical high purity applications – from pharmaceutical to power industry. CPA lines of spiral-wound RO membranes are available in a variety of sizes and deliver unmatched performance with the highest salt rejection rates.
CPA5-LD is the fourth generation CPA high rejection brackish water RO membrane. This 400 sq. ft. membrane with 99.7% rejection was an upgrade to the CPA3 membrane as it is designed with Low Differential Pressure LDTM. It offers the improved rejection of all ions including silica and nitrates.
CPA5-LD membranes use a patented 34 mil thickness feed spacer that increases effectiveness of membrane cleaning.
Specified Performance
Permeate Flow: 2,100 gpd (7.95 m3/d)
Salt Rejection: 99.7% (99.5% minimum)
Configuration: Low Fouling Spiral Wound
Membrane Polymer: Composite Polyamide
Active Area Membrane: 80 ft2 (7.43 m2)
Feed Spacer: 34 mil (0.86 mm)
Maximum Applied Pressure: 600 psig (4.14 MPa)
Max. Chlorine Concentration: < 0.1 ppm
Maximum Operating Temperature: 113 °F (45 °C)
pH Range, Continuous (Cleaning): 2-10 (1-12)
Max. Feedwater Turbidity: 1.0 NTU
Max. Feedwater SDI (15 mins): 5.0
Maximum Feed Flow: 16 gpm (3.6 m3/h)
Minimum Brine Flow: 3 gpm (0.7 m3/h)
Max. Pressure Drop for Each Element: 15 psi (0.10 MPa)
As a result, the CPA5-LD membrane does not need to be cleaned frequently – thus reducing treatment cost – while offering extreme durability and consistent performance.
CPA5-MAX membranes have 440 square feet of membrane area and are well suited for polishing RO and low fouling applications. This increased membrane area can reduce capital costs by requiring fewer pressure vessels and less floor space.
CPA5-LD membrane is available in diameters of 4.0 and 8.0 inches and the CPA5-MAX membrane is available in 8.0 inch diameter.
Untuk permintaan penawaran Hydranautics CPA5-LD-4040 silahkan hubungi
Kontak kami
PT PROFILTER INDONESIA
Ruko Blok G/54 – Gudang A/01
Jl.Canadian Broadway
Kawasan Pergudangan Commpark – Kotawisata – Cibubur
Kantor : +6221 84937329 , 84937805 , 22962668
Mobile : 081385066789
Email : sales@profilterindonesia.com